BM Series Bauer Gear Motor

Overview of BM Series Bauer Gear Motor

Bauer geared motors have been used in material handling for over 20 years to drive overhead monorail conveyors. The BM geared motor is the ideal solution for floor conveyors. The clutch lever is always on the “L” side of the geared motor, the side opposite the motor. This allows the geared motor to be designed with output shafts on both sides, which also allows it to be used as a drive for floor conveyors. 

Operate reliably even in hostile environments
The drives are provided with IP65 protection as standard. This is a great advantage when operating in dusty environments. 

Low-noise operation 
The noise emitted by a two-ratio gear motor is lower than that of a three-ratio motor with the same ratio. First gear, the main source of noise, has a smaller diameter than three-ratio models.

Low operating costs 
BM09 gear motor size in load range approx. The 2000 kg has a worm gear for the first ratio and a spur gear for the second ratio. Specially developed worm gears with very low ratios provide very high efficiency, similar to bevel gear transmissions.

Features BM Series Bauer Gear Motor

• Rated power up to 0.55 kW.
• Torque from 90Nm
• Radial force up to 6,500 N
• Flexible installation capabilities
• Completely self-contained, sealed against dust and water spray
• Change the lubricating oil for the first time after 15000 hours
• The gearbox has low noise
• Connect power source 110 ... 690V, 50/60Hz
• Enclosure IP65 (Standard), IP66 (Optional)
• Standard connection with CAGE CLAMP®
• Additional features: 
• Connect using Plug connector.
• CE mark
• CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
• Motor according to EN 60034
• Corrosion type based on DIN ISO 12944-5
• C1, C2, C3, C4, C5-I, C5-M

Related information about Bauer Gear Motor

-> See more products from Bauer  Gear Motor here 

-> See more products  here