VA 570-0695 0570-Heat flow meter for measuring consumption CS Instruments

General information

VA 570 technical specifications

Gives speeds up to 224 Nm/s

Temperature range up to maximum 180°C

Maximum pressure 16 bar, up to 40 bar in special version PN 40

Can be used from DN15 to DN 80

High accuracy with an accuracy of ±1.5% or ±1% of measured value, as well as ±0.3% of full scale 04...20 mA, pulsed and one Modbus RTU interface (RS 485) as standard, optional interfaces such as two galvanically isolated analog outputs (04...20 mA), Modbus TCP (Ethernet), PoE, M-Bus

Pressure range up to 40 bar IP 67

Integrated display to display measured values

Settings can be changed via keys on the display

Total readings can be reset via the display

The included accessories

VA 570 flow meter with integrated 1/2" measuring section 0695 0570 + order code A_…R_ VA 570 flow meter with integrated 3/4" measuring section 0695 0571

VA 570 flow meter with integrated 1" measuring section 0695 0572

VA 570 flow meter with integrated 1 1/4" measuring section 0695 0573

VA 570 flow meter with integrated 1 1/2" measuring section 0695 0574 VA 570 flow meter with integrated 2" measuring section 0695 0575

VA 570 flow meter with integrated DN 15 measuring section with flange 0695 2570

VA 570 flow meter with integrated DN 20 measuring section with flange 0695 2571

VA 570 flow meter with integrated DN 25 measuring section with flange 0695 2572

VA 570 flow meter with integrated DN 32 measuring section with flange 0695 2573

VA 570 flow meter with integrated DN 40 measuring section with flange 0695 2574

VA 570 flow meter with integrated DN 50 measuring section with flange 0695 2575

VA 570 flow meter with integrated DN 65 measuring section with flange 0695 2576

VA 570 flow meter with integrated DN 80 measuring section with flange 0695 2577 Closing cap for measuring section in aluminum 0190 0001 Closing cap for measuring section stainless steel 1.4404 0190 0002

Connection cable for probes 5 m with open ends 0553 0108

Connection cable for probes 10 m with open ends 0553 0109

Ethernet connection cable length 5 m, M12 plug x-coded (8 pin) to RJ 45 plug 0553 2503

Ethernet connection cable length 10 m, M12 plug x-coded (8 pin) to RJ 45 plug 0553 2504

Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A 0554 0110

ISO calibration certificate at 5 measuring points for VA sensors 3200 0001

Additional calibration point (point freely selectable) Volume flow 0700 7720

CS Service Software VA 550 incl. interface cable to PC (USB) and power supply - for configuration / parametrisation of VA 550 0554 2007 PNG cable screwing - standard

VA 550/570 0553 0552 PNG cable screwing - for ATEX version VA 550/570 0553 0551

See more technical documents here

See more technical products here

-------------

Communications Phone number: 0348097237

Email: Tu@jon-jul.com

Address: No. 4, Street 14, Highway 13, Van Phuc Urban Area, Hiep Binh Phuoc Ward, Thu Duc City, Ho Chi Minh City, Vietnam