SFC Models Viet Nam

Price: Contact

Brand: Mikipulley Viet Nam

Category: Industrial joints

Supplier: Jon&Jul Việt Nam

Origin: Japan

Ứng dụng sản phẩm: accessory, Automation equipment, Electronic, Industry, Mechanical

Gọi lại cho tôi

Contact consultant

Tú Sale JJ

tu@jon-jul.com

0348097237

SFC Models industrial couplings Mikipulley Vietnam 

Introducing SFC Models Mikipulley Vietnam 

Types of SFC-□SA2

[Specifications]

 
Model Type Rated torque
[N･m]		 False Max. rotation speed
[min  -1  ]		 Torsional stiffness
[N･m/rad]		 Axial stiffness
[N/mm]		 Moment of inertia
[kg･m  2  ]		 Mass[kg]
Song song［mm］ Angular［゜］ Shaft［mm］
SFC-002SA2 C 0,25 0,01 0,5 ±0,04 10000 190 34 0,06×10 -6 0,003
SFC-005SA2 C 0,6 0,02 0,5 ±0,05 10000 500 140 0,26×10 -6 0,007
SFC-010SA2 C 1 0,02 1 ±0,1 10000 1400 140 0,58×10 -6 0,011
SFC-020SA2 C 2 0,02 1 ±0,15 10000 3700 64 2,39×10 -6 0,025
SFC-025SA2 C 4 0,02 1 ±0,19 10000 5600 60 3,67×10 -6 0,029
SFC-030SA2 ONE 5 0,02 1 ±0,2 10000 8000 64 4,07×10 -6 0,034
B 6,09×10 -6 0,041
C 8,20×10 -6 0,049
SFC-035SA2 C 10 0,02 1 ±0,25 10000 18000 112 18,44×10 -6 0,082
SFC-040SA2 ONE 12 0,02 1 ±0,3 10000 20000 80 16,71×10 -6 0,077
B 22,55×10 -6 0,085
C 29,25×10 -6 0,100
SFC-050SA2 ONE 25 0,02 1 ±0,4 10000 32000 48 55,71×10 -6 0,159
B 76,26×10 -6 0,177
C 99,03×10 -6 0,206
SFC-055SA2 C 40 0,02 1 ±0,42 10000 50000 43 188,0×10 -6 0,314
SFC-060SA2 ONE 60 0,02 1 ±0,45 10000 70000 76,4 145,9×10 -6 0,283
B 205,0×10 -6 0,326
C 268,6×10 -6 0,385
SFC-080SA2 C 100 0,02 1 ±0,55 10000 140000 128 710,6×10 -6 0,708
SFC-090SA2 C 180 0,02 1 ±0,65 10000 100000 108 1236×10 -6 0,946
SFC-100SA2 C 250 0,02 1 ±0,74 10000 120000 111 1891×10 -6 1.202

* Types A/B/C are automatically specified by Miki Pulley according to the bore diameter combination you select and cannot be specified by the customer.

* Check the list of Standard Bore Diameters as the rated torque may be limited by the holding capacity of the shaft connection.

* Max. Rotation speed does not take into account dynamic balance.

*The torsional stiffness values ​​given are those measured for the individual element.

* Moment of inertia and mass are measured for the largest bore diameter.

[Size]

 

Unit [mm]
Model Type d1[mm] d2[mm] D[mm] NE[mm] N[mm] Ｌ[mm] LF[mm] S[mm] A1[mm] A2[mm] C[mm] K[mm] M
Qty - Nominal diameter		 Tightening torque [N･m]
Minimum. Max. Minimum. Max.
SFC-002SA2 Ｃ 3 5 3 5 12 12,4 ─ 12:35 5,9 0,55 ─ 3,7 1.9 5.6 1-M1.6 0.23 to 0.28
SFC-005SA2 C 3 6 3 6 16 ─ ─ 16,7 7,85 1 ─ 4,8 2,5 6,5 1-M2 0.4 to 0.5
SFC-010SA2 C 3 8 3 8 19 ─ ─ 19h35 9:15 a.m 1,05 ─ 5,8(6) 3,15 8,5 1-M2.5(M2) 1.0 to 1.1(0.4 to 0.5)
SFC-020SA2 C 4 10 4 11 26 ─ ─ 23.15 10:75 1,65 ─ 9,5 3.3 10.6 1-M2.5 1.0 to 1.1
SFC-025SA2 C 5 14 5 14 29 ─ ─ 23,4 10:75 1.9 ─ 11 3.3 14,5 1-M2.5 1.0 to 1.1
SFC-030SA2 ONE 5 10 5 10 34 ─ 21.6 27,3 12,4 2,5 8 ─ 3,75 14,5 1-M3 1.5 to 1.9
B 5 10 More than 10 16 8 12,5
C More than 10 14 More than 10 16 ─ ─ 12,5
SFC-035SA2 C 6 16 6 19 39 ─ ─ 34 15,5 3 ─ 14 4,5 17 1-M4 3.4 to 4.1
SFC-040SA2 ONE 8 15 8 15 44 ─ 29,6 34 15,5 3 11 ─ 4,5 19,5 1-M4 3.4 to 4.1
B 8 15 More than 15 24 11 17
C More than 15 19 More than 15 24 ─ ─ 17
SFC-050SA2 ONE 8 19 8 19 56 ─ 38 43,4 20,5 2.4 14,5 ─ 6 26 1-M5 7.0 to 8.5
B 8 19 Over 19 30 14,5 22
C Over 19 25 Over 19 30 ─ ─ 22
SFC-055SA2 C 10 30 10 30 63 ─ ─ 50,6 24 2.6 ─ 23 7,75 31 1-M6 14 to 15
SFC-060SA2 ONE 11 24 11 24 68 ─ 46 53,6 25,2 3.2 17,5 ─ 7,75 31 1-M6 14 to 15
B 11 24 Over 24 years old 35 17,5 26,5
C Over 24 years old 30 Over 24 years old 35 ─ ─ 26,5
SFC-080SA2 C 18 35 18 40 82 ─ ─ 68 30 8 ─ 28 9 38 1-M8 27 to 30
SFC-090SA2 C 25 40 25 45 94 ─ ─ 68,3 30 8.3 ─ 34 9 42 1-M8 27 to 30
SFC-100SA2 C 32 45 32 45 104 ─ ─ 69,8 30 9,8 ─ 39 9 48 1-M8 27 to 30

* Types A/B/C are automatically specified by Miki Pulley according to the bore diameter combination you select and cannot be specified by the customer.

* øDB values ​​are measured assuming that the head of the clamping bolt is larger than the outside diameter of the hub.

* Dimension K is the inner diameter of the element. For dimensions d2 exceeding this value, the shaft can only be fitted up to size LF to the side hub d2.

* The nominal diameter of the clamping bolt M is equal to the quantity minus the nominal diameter of the screw thread, where the quantity is for the hub on one side.

* Figures in parentheses ( ) of SFC-010 are values ​​when d1 or d2 is ø8 mm.

[Standard bore diameter]

 
Standard bore diameter (optional), d1/d2 [mm] and limited rated torque [N∙m]
Nominal hole diameter 3 4 5 6 6:35 7 8 9 9,525 10 11 12 13 14 15 16 17 18 19 20 22 24 25 28 30 32 35 38 40 42 45
Shaft tolerance h7 (h6･g6) B ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
j6 axis tolerance (Optional) J   　   　   　   　   　   　   　   　   　 ○ 　 ○ ○   ○   　   　   　  
Axle tolerance k6 (Optional) K 　   　   　   ○ ○ 　   　   　 ○ 　 ○ 　   ○   ○ ○ 　   　 ○ 　 ○ 　   　
SFC-002SA2 d1 ● ● ●                                                       　
d2 ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-005SA2 d1 ● ● ● ●                                                     　
d2 ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-010SA2 d1 ● ● ● ● ● ● ●                                               　
d2 ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-020SA2 d1 　 ● ● ● ● ● ● ● ● ●                                         　
d2   ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-025SA2 d1 　 　 2.1 ● ● ● ● ● ● ● ● ● ● ●                                 　
d2     2.1 ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-030SA2 d1 　 　 2,8 3,4 ● ● ● ● ● ● ● ● ● ●                                 　
d2     2,8 3,4 ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-035SA2 d1 　 　 　 5 5 6,6 ● ● ● ● ● ● ● ● ● ●                             　
d2       5 5 6,6 ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　  
SFC-040SA2 d1 　 　 　 　 　 　 9 ● ● ● ● ● ● ● ● ● ● ● ●                       　
d2             9 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　  
SFC-050SA2 d1 　 　 　 　 　 　 18 20 22 22 ● ● ● ● ● ● ● ● ● ● ● ● ●               　
d2             18 20 22 22 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　  
SFC-055SA2 d1 　 　 　 　 　 　 　 　 　 31 34 36 38 ● ● ● ● ● ● ● ● ● ● ● ●           　
d2                   31 34 36 38 ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　  
SFC-060SA2 d1 　 　 　 　 　 　 　 　 　 　 50 51 ● ● ● ● ● ● ● ● ● ● ● ● ●           　
d2                     50 51 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　  
SFC-080SA2 d1 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 ● ● ● ● ● ● ● ● ● ●       　
d2                                   ● ● ● ● ● ● ● ● ● ● ● ● 　  
SFC-090SA2 d1 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 ● ● ● ● ● ● ●   　
d2                                             ● ● ● ● ● ● ● ● ●
SFC-100SA2 d1 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 226 ● ● ● ● ●
d2                                                   226 ● ● ● ● ●

* The axial tolerance for standard bore diameters is h7 (h6 or g6): symbol B. However, for bore diameters ø35, the axial tolerance is － 0.025 to ＋0.010.

* Shaft tolerance j6/k6: designation J/K is optional and is only supported for bore diameters marked with ○ .

* Hole diameters marked with ● or numbers are supported as standard hole diameters. Refer to Miki Pulleys for special arrangements applicable to other bore diameters.

* The bore diameter field containing the numbers is limited in the nominal torque by the holding capacity of the shaft connection because of the small bore diameter. The numbers represent rated torque [N·m].

Types of SFC-□DA2

[Specifications]

 
Model Type Rated torque
[N･m]		 False Max. rotation speed
[min  -1  ]		 Torsional stiffness
[N･m/rad]		 Axial stiffness
[N/mm]		 Moment of inertia
[kg･m  2  ]		 Mass[kg]
Song song［mm］ Angular［゜］ Shaft［mm］
SFC-002DA2 C 0,25 0,03 0.5(One side) ±0,08 10000 95 17 0,07×10 -6 0,004
SFC-005DA2 C 0,6 0,05 0.5(One side) ±0,1 10000 250 70 0,37×10 -6 0,010
SFC-010DA2 C 1 0,11 1(One side) ±0,2 10000 700 70 0,80×10 -6 0,015
SFC-020DA2 C 2 0,15 1(One side) ±0,33 10000 1850 32 3,43×10 -6 0,035
SFC-025DA2 C 4 0,16 1(One side) ±0,38 10000 2800 30 5,26×10 -6 0,040
SFC-030DA2 ONE 5 0,18 1(One side) ±0,4 10000 4000 32 7,43×10 -6 0,054
B 9,45×10 -6 0,060
C 11,56×10 -6 0,068
SFC-035DA2 C 10 0,24 1(One side) ±0,5 10000 9000 56 26,93×10 -6 0,121
SFC-040DA2 ONE 12 0,24 1(One side) ±0,6 10000 10000 40 29,98×10 -6 0,124
B 35,82×10 -6 0,131
C 42,52×10 -6 0,146
SFC-050DA2 ONE 25 0,28 1(One side) ±0,8 10000 16000 24 98,34×10 -6 0,250
B 118,9×10 -6 0,268
C 141,7×10 -6 0,298
SFC-055DA2 C 40 0,31 1(One side) ±0,84 10000 25000 21,5 261,3×10 -6 0,459
SFC-060DA2 ONE 60 0,34 1(One side) ±0,9 10000 35000 38,2 256,6×10 -6 0,447
B 315,7×10 -6 0,489
C 379,3×10 -6 0,549
SFC-080DA2 C 100 0,52 1(One side) ±1,10 10000 70000 64 1039×10 -6 1.037
SFC-090DA2 C 180 0,52 1(One side) ±1,30 10000 50000 54 1798×10 -6 1.369
SFC-100DA2 C 250 0,55 1(One side) ±1,48 10000 60000 55,5 2754×10 -6 1.739

* Types A/B/C are automatically specified by Miki Pulley according to the bore diameter combination you select and cannot be specified by the customer.

* Check the "Standard Bore Diameter" as the rated torque may be limited by the holding capacity of the shaft connection.

* Max. Rotation speed does not take into account dynamic balance.

*The torsional stiffness values ​​given are those measured for the individual element

* Moment of inertia and mass are measured for the largest bore diameter.

[Size]

 

Unit [mm]
Model Type d1[mm] d2[mm] D[mm] NE[mm] N[mm] Ｌ[mm] LF[mm] LP[mm] S[mm] A1[mm] A2[mm] C[mm] d3[mm] K[mm] M
Qty - Nominal diameter		 Tightening torque [N･m]
Minimum. Max. Minimum. Max.
SFC-002DA2 C 3 5 3 5 12 12,4 ─ 15,7 5,9 2,8 0,55 ─ 3,7 1.9 5.2 5.6 1-M1.6 0.23 to 0.28
SFC-005DA2 C 3 6 3 6 16 ─ ─ 23,2 7,85 5,5 1 ─ 4,8 2,5 6,5 6,5 1-M2 0.4 to 0.5
SFC-010DA2 C 3 8 3 8 19 ─ ─ 25,9 9:15 a.m 5,5 1,05 ─ 5,8(6) 3,15 8,5 8,5 1-M2.5(M2) 1.0 to 1.1(0.4 to 0.5)
SFC-020DA2 C 4 10 4 11 26 ─ ─ 32,3 10:75 7,5 1,65 ─ 9,5 3.3 10.6 10.6 1-M2.5 1.0 to 1.1
SFC-025DA2 C 5 14 5 14 29 ─ ─ 32,8 10:75 7,5 1.9 ─ 11 3.3 15 14,5 1-M2.5 1.0 to 1.1
SFC-030DA2 ONE 5 10 5 10 34 ─ 21.6 37,8 12,4 8 2,5 8 ─ 3,75 15 14,5 1-M3 1.5 to 1.9
B 5 10 More than 10 16 8 12,5
C More than 10 14 More than 10 16 ─ ─ 12,5
SFC-035DA2 C 6 16 6 19 39 ─ ─ 48 15,5 11 3 ─ 14 4,5 17 17 1-M4 3.4 to 4.1
SFC-040DA2 ONE 8 15 8 15 44 ─ 29,6 48 15,5 11 3 11 ─ 4,5 20 19,5 1-M4 3.4 to 4.1
B 8 15 More than 15 24 11 17
C More than 15 19 More than 15 24 ─ ─ 17
SFC-050DA2 ONE 8 19 8 19 56 ─ 38 59,8 20,5 14 2.4 14,5 ─ 6 26 26 1-M5 7.0 to 8.5
B 8 19 Over 19 30 14,5 22
C Over 19 25 Over 19 30 ─ ─ 22
SFC-055DA2 C 10 30 10 30 63 ─ ─ 68,7 24 15,5 2.6 ─ 23 7,75 31 31 1-M6 14 to 15
SFC-060DA2 ONE 11 24 11 24 68 ─ 46 73,3 25,2 16,5 3.2 17,5 ─ 7,75 31 31 1-M6 14 to 15
B 11 24 Over 24 years old 35 17,5 26,5
C Over 24 years old 30 Over 24 years old 35 ─ ─ 26,5
SFC-080DA2 C 18 35 18 40 82 ─ ─ 98 30 22 8 ─ 28 9 40 38 1-M8 27 to 30
SFC-090DA2 C 25 40 25 45 94 ─ ─ 98,6 30 22 8.3 ─ 34 9 47 42 1-M8 27 to 30
SFC-100DA2 C 32 45 32 45 104 ─ ─ 101,6 30 22 9,8 ─ 39 9 50 48 1-M8 27 to 30

* Types A/B/C are automatically specified by Miki Pulley according to the bore diameter combination you select and cannot be specified by the customer.

* øDB values ​​are measured assuming that the head of the clamping bolt is larger than the outside diameter of the hub.

* Dimension K is the inner diameter of the element. For dimensions d2 exceeding this value, the shaft can only be fitted up to size LF to the side hub d2.

* The nominal diameter of the clamping bolt M is equal to the quantity minus the nominal diameter of the screw thread, where the quantity is for the hub on one side.

* Figures in parentheses ( ) of SFC-010 are values ​​when d1 or d2 is ø8 mm.

[Standard bore diameter]

 
Standard bore diameter (optional), d1/d2 [mm] and limited rated torque [N∙m]
Nominal hole diameter 3 4 5 6 6:35 7 8 9 9,525 10 11 12 13 14 15 16 17 18 19 20 22 24 25 28 30 32 35 38 40 42 45
Shaft tolerance h7 (h6･g6) B ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
j6 axis tolerance (Optional) J   　   　   　   　   　   　   　   　   　 ○ 　 ○ ○   ○   　   　   　  
Axle tolerance k6 (Optional) K 　   　   　   ○ ○ 　   　   　 ○ 　 ○ 　   ○   ○ ○ 　   　 ○ 　 ○ 　   　
SFC-002DA2 d1 ● ● ●                                                       　
d2 ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-005DA2 d1 ● ● ● ●                                                     　
d2 ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-010DA2 d1 ● ● ● ● ● ● ●                                               　
d2 ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-020DA2 d1 　 ● ● ● ● ● ● ● ● ●                                         　
d2   ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-025DA2 d1 　 　 2.1 ● ● ● ● ● ● ● ● ● ● ●                                 　
d2     2.1 ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-030DA2 d1 　 　 2,8 3,4 ● ● ● ● ● ● ● ● ● ●                                 　
d2     2,8 3,4 ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　 　 　 　  
SFC-035DA2 d1 　 　 　 5 5 6,6 ● ● ● ● ● ● ● ● ● ●                             　
d2       5 5 6,6 ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　 　 　 　  
SFC-040DA2 d1 　 　 　 　 　 　 9 ● ● ● ● ● ● ● ● ● ● ● ●                       　
d2             9 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　 　 　 　  
SFC-050DA2 d1 　 　 　 　 　 　 18 20 22 22 ● ● ● ● ● ● ● ● ● ● ● ● ●               　
d2             18 20 22 22 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　  
SFC-055DA2 d1 　 　 　 　 　 　 　 　 　 31 34 36 38 ● ● ● ● ● ● ● ● ● ● ● ●           　
d2                   31 34 36 38 ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　 　 　  
SFC-060DA2 d1 　 　 　 　 　 　 　 　 　 　 50 51 ● ● ● ● ● ● ● ● ● ● ● ● ●           　
d2                     50 51 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 　 　 　  
SFC-080DA2 d1 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 ● ● ● ● ● ● ● ● ● ●       　
d2                                   ● ● ● ● ● ● ● ● ● ● ● ● 　  
SFC-090DA2 d1 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 ● ● ● ● ● ● ●   　
d2                                             ● ● ● ● ● ● ● ● ●
SFC-100DA2 d1 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 226 ● ● ● ● ●
d2                                                   226 ● ● ● ● ●

* The axial tolerance for standard bore diameters is h7 (h6 or g6): symbol B. However, for bore diameters ø35, the axial tolerance is － 0.025 to ＋0.010.

* Shaft tolerance j6/k6: designation J/K is optional and is only supported for bore diameters marked with ○ .

* Hole diameters marked with ● or numbers are supported as standard hole diameters. Refer to Miki Pulleys for special arrangements applicable to other bore diameters.

* The bore diameter field containing the numbers is limited in the nominal torque by the holding capacity of the shaft connection because of the small bore diameter. The numbers represent rated torque [N·m].

Related products

CODE NAME  NAME BRAND
SFC-002SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-005SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-010SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-020SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-025SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-030SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-035SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-040SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-050SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-055SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-060SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-080SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-090SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-100SA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-002DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-005DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-010DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-020DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-025DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-030DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-035DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-040DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-050DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-055DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-060DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-080DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-090DA2 Couplings SFC Models Coupling the SFC model Miki Pulley
SFC-100DA2 Couplings SFC Models Coupling the SFC model Miki Pulley

See more technical documents  here

See more technical products  here

Link FaceBook  Jon&Jul VietNam

-------------

Communications

Phone number: 0348097237
Email: Tu@jon-jul.com
Address: No. 4, Street 14, Highway 13, Van Phuc Urban Area, Hiep Binh Phuoc Ward, Thu Duc City, Ho Chi Minh City, Vietnam