SFM Models Pulley Industrial coupling Mikipulley Vietnam

Introducing SFM Models

SFM Models

SFM model

[Specifications]

 
Model Rated torque
[Nï½¥m]
False Max. rotation speed
[min  -1  ]
Torsional stiffness
[Nï½¥m/rad]
Axial stiffness
[N/mm]
Moment of inertia
[kgï½¥m  2  ]
Mass
[kg]
Song song
[mm]
Angle
[°]
Shaft
[mm]
SFM-060SS-□B-□B-60N 60 0,02 1 ±0,3 24000 104000 399 0,22×10 -3 0,52
SFM-060SS-□B-□B-80N 80 0,02 1 ±0,3 24000 104000 399 0,23×10 -3 0,49
SFM-070SS-□B-□B-90N 90 0,02 1 ±0,5 24000 240000 484 0,40×10 -3 0,72
SFM-070SS-□B-□B-100N 100 0,02 1 ±0,5 24000 240000 484 0,42×10 -3 0,67
SFM-080SS-□B-□B-150N 150 0,02 1 ±0,5 24000 120000 96 0,79×10 -3 1.04
SFM-080SS-□B-□B-200N 200 0,02 1 ±0,5 24000 310000 546 1,25×10 -3 1,40
SFM-090SS-□B-□B-250N 250 0,02 1 ±0,6 24000 520000 321 1,54×10 -3 1,62
SFM-090SS-□B-□B-300N 300 0,02 1 ±0,6 24000 520000 321 1,58×10 -3 1,53
SFM-100SS-□B-□B-450N 450 0,02 1 ±0,65 20000 740000 540 3,27×10 -3 2,53
SFM-120SS-□B-□B-600N 600 0,02 1 ±0,8 20000 970000 360 6,90×10 -3 3,78

*The torsional stiffness values ​​given are calculated for the element only.

*Moment of inertia and mass measured for maximum bore diameter.

[Size]

 

Unit [mm]
Model d1[mm] d2[mm] D[mm] L[mm] N1ï½¥N2[mm] LF[mm] S[mm] K[mm] Quantity M1ï½¥M2
- Nominal diameter.
M1ï½¥M2
Tightening torque
[Nï½¥m]
SFM-060SS-□B-□B-60N 12・14・15・16・17・18・19 12・14・15・16・17・18・19・20・22 58 53,4 44 24 5,4 32 2-M6 14
- 24ï½¥25ï½¥28 58 53,4 48 24 5,4 32 2-M5 7
- 30 58 53,4 52 24 5,4 32 2-M5 7
SFM-060SS-□B-□B-80N 20・22 20・22 58 53,4 44 24 5,4 32 2-M6 14
24ï½¥25ï½¥28 24ï½¥25ï½¥28 58 53,4 48 24 5,4 32 2-M5 7
30 30 58 53,4 52 24 5,4 32 2-M5 7
SFM-070SS-□B-□B-90N 18・19 18・19・20・22・24・25 68 55,9 47 25 5,9 38 2-M6 14
- 28ï½¥30ï½¥32ï½¥35 68 55,9 56 25 5,9 38 2-M6 14
SFM-070SS-□B-□B-100N 20・22・24・25 20・22・24・25 68 55,9 47 25 5,9 38 2-M6 14
28ï½¥30ï½¥32ï½¥35 28ï½¥30ï½¥32ï½¥35 68 55,9 56 25 5,9 38 2-M6 14
SFM-080SS-□B-□B-150N 22・24・25 22・24・25 78 68,3 53 30 8.3 37 2-M8 34
28ï½¥30ï½¥32ï½¥35 28ï½¥30ï½¥32ï½¥35 78 68,3 56 30 8.3 37 2-M6 14
SFM-080SS-□B-□B-200N 22・24・25 22・24・25 78 67,7 53 30 7,7 42 2-M8 34
28ï½¥30ï½¥32ï½¥35 28ï½¥30ï½¥32ï½¥35 78 67,7 70 30 7,7 42 2-M8 34
38 38 78 67,7 74 30 7,7 42 2-M8 34
SFM-090SS-□B-□B-250N 25・28 25・28・30・32 88 68,3 66 30 8.3 50 2-M8 34
- 35ï½¥38ï½¥40ï½¥42 88 68,3 74 30 8.3 50 2-M8 34
SFM-090SS-□B-□B-300N 30・32 30・32 88 68,3 66 30 8.3 50 2-M8 34
35ï½¥38ï½¥40ï½¥42 35ï½¥38ï½¥40ï½¥42 88 68,3 74 30 8.3 50 2-M8 34
SFM-100SS-□B-□B-450N 32・35・38・40・42・45・48 32・35・38・40・42・45・48 98 90,2 84 40 10.2 56 2-M10 68
SFM-120SS-□B-□B-600N 32・35・38・40・42・45 32・35・38・40・42・45 118 90,2 84 40 10.2 68 2-M10 68
48ï½¥50ï½¥55 48ï½¥50ï½¥55 118 90,2 100 40 10.2 68 2-M10 68

* The nominal diameter of M1/M2 clamping bolts is expressed as the number of bolts - nominal diameter, and the quantity is the number of one hub.

[Combination of standard bore diameters] 

 
Model Standard hole diameter d1ï½¥d2[mm]
Nominal diameter 12 14 15 16 17 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 55
SFM-060SS-□B-□B-60N d1 ● ● ● ● ● ● ●                              
d2 ● ● ● ● ● ● ● ● ● ● ● ● ●                  
SFM-060SS-□B-□B-80N d1               ● ● ● ● ● ●                  
d2               ● ● ● ● ● ●                  
SFM-070SS-□B-□B-90N d1           ● ●                              
d2           ● ● ● ● ● ● ● ● ● ●              
SFM-070SS-□B-□B-100N d1               ● ● ● ● ● ● ● ●              
d2               ● ● ● ● ● ● ● ●              
SFM-080SS-□B-□B-150N d1                 ● ● ● ● ● ● ●              
d2                 ● ● ● ● ● ● ●              
SFM-080SS-□B-□B-200N d1                 ● ● ● ● ● ● ● ●            
d2                 ● ● ● ● ● ● ● ●            
SFM-090SS-□B-□B-250N d1                     ● ●                    
d2                     ● ● ● ● ● ● ● ●        
SFM-090SS-□B-□B-300N d1                         ● ● ● ● ● ●        
d2                         ● ● ● ● ● ●        
SFM-100SS-□B-□B-450N d1                           ● ● ● ● ● ● ●    
d2                           ● ● ● ● ● ● ●    
SFM-120SS-□B-□B-600N d1                           ● ● ● ● ● ● ● ● ●
d2                           ● ● ● ● ● ● ● ● ●

* Hole diameters marked with ● are supported as standard hole diameters.

[Balance correction] -Clamp

 
Model (Size) Classification of balances Supported rotation speed[min  -1  ]
10000 or less 15000 or less 18000 or less 20000 or less 24000 or less
SFM-060SS G6.3・G2.5 ● ● ● ● ●
SFM-070SS G6.3・G2.5 ● ● ● ● ●
SFM-080SS G6.3・G2.5 ● ● ● ● ●
SFM-090SS G6.3・G2.5 ● ● ● ● ●
SFM-100SS G6.3・G2.5 ● ● ● ●  
SFM-120SS G6.3・G2.5 ● ● ● ●  

* We will perform balance correction for the supported rotation speeds marked with ● .

[Technical specifications] - Wedge joint

 
Model Rated torque
[Nï½¥m]
False Max. rotation speed
[min  -1  ]
Torsional stiffness
[Nï½¥m/rad]
Axial stiffness
[N/mm]
Moment of inertia
[kgï½¥m  2  ]
Mass
[kg]
Song song
[mm]
Angle
[°]
Shaft
[mm]
SFM-070SS-□K-□K-100N 100 0,02 1 ±0,5 24000 240000 484 0,66×10 -3 0,92
SFM-080SS-□K-□K-150N 150 0,02 1 ±0,5 24000 120000 96 1,21×10 -3 1,03
SFM-080SS-□K-□K-200N 200 0,02 1 ±0,5 24000 310000 546 1,11×10 -3 1,26
SFM-090SS-□K-□K-300N 300 0,02 1 ±0,6 24000 520000 321 1,75×10 -3 1,48
SFM-100SS-□K-□K-450N 450 0,02 1 ±0,65 20000 740000 540 2,56×10 -3 1,87
SFM-120SS-□K-□K-600N 600 0,02 1 ±0,8 20000 970000 360 5,33×10 -3 2,50
SFM-140SS-□K-□K-800N 800 0,02 1 ±1,0 20000 1400000 360 10,28×10 -3 4,66
SFM-140SS-□K-□K-1000N 1000 0,02 1 ±1,0 20000 1400000 360 14,70×10 -3 5,01

*The torsional stiffness values ​​given are calculated for the element only.

*Moment of inertia and mass measured for maximum bore diameter.

[Dimensions] - Wedge joint

 

Unit [mm]
Model d1[mm] d2[mm] D[mm] L[mm] N1ï½¥N2[mm] LF[mm] S[mm] C[mm] K[mm] H[mm] Quantity M1
-Nominal diameter.
M1
Tightening torque
[Nï½¥m]
Quantity M2
-Nominal diameter.
SFM-070SS-□K-□K-100N 18・19 18・19 68 62,9 53 23,5 5,9 5 38 3-5.1 6-M6 10 3-M6
20ï½¥22ï½¥24ï½¥25 20ï½¥22ï½¥24ï½¥25 58
28ï½¥30 28ï½¥30 63
32ï½¥35 32ï½¥35 68
SFM-080SS-□K-□K-150N 22・24・25 22・24・25 78 69,3 58 25,5 8.3 5 37 4-5.1 4-M6 10 2-M6
28ï½¥30 28ï½¥30 63
32ï½¥35 32ï½¥35 68
- 38 73
SFM-080SS-□K-□K-200N 22・24・25 22・24・25 78 68,7 58 25,5 7,7 5 42 3-5.1 6-M6 10 3-M6
28ï½¥30 28ï½¥30 63
32ï½¥35 32ï½¥35 68
38 38 73
SFM-090SS-□K-□K-300N 28・30 28・30 88 69,3 63 25,5 8.3 5 50 3-6,8 6-M6 10 3-M6
32ï½¥35 32ï½¥35 68
38ï½¥40ï½¥42 38ï½¥40ï½¥42 73
45 45 78
48 48 83
SFM-100SS-□K-□K-450N 32・35 32・35 98 75,2 68 27,5 10.2 5 56 3-6,8 6-M6 10 3-M6
38ï½¥40ï½¥42 38ï½¥40ï½¥42 73
45 45 78
48ï½¥50 48ï½¥50 83
SFM-120SS-□K-□K-600N 35 35 118 75,2 68 27,5 10.2 5 68 3-6,8 6-M6 10 3-M6
38ï½¥40ï½¥42 38ï½¥40ï½¥42 73
45 45 78
48ï½¥50ï½¥52 48ï½¥50ï½¥52 83
55 55 88
60ï½¥62ï½¥65 60ï½¥62ï½¥65 98
- 70 108
SFM-140SS-□K-□K-800N 35・38 35・38 138 94,6 83 36,5 10.6 5,5 78 3-8.6 6-M8 24 3-M8
40ï½¥42ï½¥45 40ï½¥42ï½¥45 88
- 48ï½¥50ï½¥52 98
55ï½¥60 108
62ï½¥65ï½¥70 118
75ï½¥80 128
SFM-140SS-□K-□K-1000N 48・50・52 48・50・52 138 94,6 98 36,5 10.6 5,5 78 3-8.6 6-M8 24 3-M8
55ï½¥60 55ï½¥60 108
62ï½¥65ï½¥70 62ï½¥65ï½¥70 118
75 75ï½¥80 128

* The nominal diameter of the pressure bolt M1 and the screw hole M2 is equal to the quantity minus the nominal diameter of the screw thread. The number of H, M1 and M2 is equal to the number of shaft on one side.

[Standard bore diameter] - Wedge joint

 
Model Standard hole diameter d1ï½¥d2[mm]
Nominal diameter 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 52 55 60 62 65 70 75 80
SFM-070SS-□K-□K-100N d1 ● ● ● ● ● ● ● ● ● ●                            
d2 ● ● ● ● ● ● ● ● ● ●                            
SFM-080SS-□K-□K-150N d1       ● ● ● ● ● ● ●                            
d2       ● ● ● ● ● ● ● ●                          
SFM-080SS-□K-□K-200N d1       ● ● ● ● ● ● ● ●                          
d2       ● ● ● ● ● ● ● ●                          
SFM-090SS-□K-□K-300N d1             ● ● ● ● ● ● ● ● ●                  
d2             ● ● ● ● ● ● ● ● ●                  
SFM-100SS-□K-□K-450N d1                 ● ● ● ● ● ● ● ●                
d2                 ● ● ● ● ● ● ● ●                
SFM-120SS-□K-□K-600N d1                   ● ● ● ● ● ● ● ● ● ● ● ●      
d2                   ● ● ● ● ● ● ● ● ● ● ● ● ●    
SFM-140SS-□K-□K-800N d1                   ● ● ● ● ●                    
d2                   ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
SFM-140SS-□K-□K-1000N d1                             ● ● ● ● ● ● ● ● ●  
d2                             ● ● ● ● ● ● ● ● ● ●

* Hole diameters marked with ● are supported as standard hole diameters.

[Balance correction] - Wedge joint

 
Model (Size) Classification of balances Supported rotation speed[min  -1  ]
10000 or less 15000 or less 18000 or less 20000 or less 24000 or less
SFM-070SS G6.3・G2.5 ● ● ● ● ●
SFM-080SS G6.3・G2.5 ● ● ● ● ●
SFM-090SS G6.3・G2.5 ● ● ● ● ●
SFM-100SS G6.3・G2.5 ● ● ● ●  
SFM-120SS G6.3・G2.5 ● ● ● ●  
SFM-140SS G6.3・G2.5 ● ● ● ●  

* We will perform balance correction for the supported rotation speeds marked with ● .


See more technical documents  here

See more technical products  here

Link FaceBook  Jon&Jul VietNam

-------------

Communications

Phone number: 0348097237
Email: Tu@jon-jul.com
Address: No. 4, Street 14, Highway 13, Van Phuc Urban Area, Hiep Binh Phuoc Ward, Thu Duc City, Ho Chi Minh City, Vietnam