TP3-2131A02M Safety Sensing Euchner Viet Nam

Jon & Jul is the official distributor of Euchner products in Vietnam

Introduction TP3-2131A02M Safety Sensing Euchner Viet Nam

- TP3-2131A02M Safety Sensing Euchner  Currently being distributed exclusively and widely by Jon-Jul Company in the Vietnamese market.

- Auxiliary release on the front
- With door monitoring contact
- Increased horizontal travel

TP3-2131A024M (Order no. 084142)


Horizontal and vertical

Adjustable in 90° steps

Increase overtravel for horizontal approach

Electromagnetic operating voltage
AC/DC 24V +10%, -15%
Protection lock type
TP3 Closed circuit current principle, spring force protection lock. Release by applying voltage to the protective lock solenoid valve.

Switching element
2131 Slow-action switching contact 2 NC + 1 NO + 1 NC (door monitoring contact)

Auxiliary release
This is used to unlock protection with the help of a tool. To protect against tampering, the auxiliary release mechanism is sealed with lacquer.

Technical specifications TP3-2131A02M Safety Sensing Euchner Viet Nam

Electrical connection values

Power consumption 8 W
Connection cross section 0.34 ... 1.5 mm²
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 2.5 kV
Utilization category  
DC-13 4 A 24 V
AC-15 4 A 230 V
Short circuit protection according to IEC 60269-1 4A gG
Solenoid operating voltage  
AC/DC 24 V -15% ... +10%
Solenoid duty cycle 100 %
Switching voltage  
min. at 10 mA 12 V
Switching current  
mine. that 24 V 1 mA
thermal rated current Ith 4 A

Mechanical values and environment

Approach speed max. 20 m/min
Connection type  
3 x M20 x 1.5
Number of door position NC contacts 1
Number of guard lock monitoring NO contacts 1
Number of guard lock monitoring positively driven contacts 2
Extraction force 20 N
Actuating force 10 N
Installation orientation any
Mechanical life 1 x 10⁶
Retention force 10 N
Switching principle Slow-action switching contact
Degree of protection IP67
Ambient temperature -20 ... +55 °C
Contact Silver alloy, gold flashed
Housing Reinforced thermoplastic
Locking force Fmax 1300 N
Locking force FZh 1000 N
Guard locking principle Closed-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

  B10D Mission time
Monitoring of the guard position 3x106 20 and
Important! Values valid at DC-13 100 mA/24V
Monitoring of guard locking 3x106 20 and
Important! Values valid at DC-13 100 mA/24V
  PL Maximum SIL Category Mission time
Control of guard locking Depending on external control of guard locking 20 and


In combination with actuator ACTUATOR-P-GNT

Horizontal overtravel 7 mm

In combination with actuator ACTUATOR-P-GT

Horizontal overtravel 2 mm
Vertical overtravel 1.5 mm


See more technical documents  here

See more technical products  here

Link FaceBook  Jon&Jul VietNam