MG3710E Vector Signal Generator Anritsu VietNam vector signal generator

Introducing MG3710E

The Vector MG3710E signal generator is a best-in-class, multi-function signal generator with excellent RF and baseband performance.

The Vector MG3710E signal generator is a best-in-class, multi-function signal generator with excellent RF and baseband performance. The MG3710E features wideband vector modulation and provides integrated baseband waveform generation with large capacity memory to ensure maximum flexibility.

It supports all major wireless LAN and mobile communications standards, and it also has the outstanding performance required for emerging and proprietary wireless communications technologies.

Dual RF and Dual Waveform options allow a single MG3710E to output up to four independently modulated signals. The MG3710E makes it easy to execute complex test scenarios that often require multiple synchronized signal generators, such as:

  • Wanted signal + noise to check receiver blocking
  • Wanted + Two CW tones to check receiver intermodulation
  • Wanted signal + Delay to check multipath
  • Multiple signals desired for MIMO testing
  • Multiple wanted signals for LTE advanced carrier aggregation testing

For these multi-signal applications, the MG3710E eliminates the cost of additional signal generators, simplifies device setup and calibration, streamlines system operations, and speeds up turnaround times. measure.

The following four types of waveform patterns can be used with the MG3710E

  • Built-in standard waveform samples
  • Optional waveform models (sold separately) (MX3700xxA, MX3700xxB, MX3710xxA)
  • Waveform generated by IQproducer waveform generation software (sold separately) (MX3701xxA)
  • IQ data is generated by general purpose signal generation software and converted waveform samples are used by MG3710E

Main performance and technical specifications MG3710E Vector Signal Generator Anritsu VietNam vector signal generator

Basic performance

Frequency range 100 kHz to 2.7/4/6 GHz (1stRF Opt-032/034/036) 
100 kHz to 2.7/4/6 GHz (2ndRF Opt-062/064/066) 
High power output +23 dBm (CW, 400 MHz to 3 GHz)
SSB phase noise <-131 dBc/Hz (typical) (1 GHz offset, 20 kHz, CW) 
ACLR -68 dBc (W-CDMA, Test Pattern 1, 64DPCH, ≤+5 dBm) 
Speed ​​conversion <600 µs (frequency/amplitude, List/Scan mode)

Baseband performance

  • RF Band: Built-in, 160 MHz*/120 MHz baseband generator
    (*: 802.11ac. Only when using MX370111A and MX370111A-002)
  • Large 64 Msamples waveform memory with optional expansion to 1024 Msampls
  • Pre-installed standard waveform models
           LTE (E-TM1.1 to TM3.3), W-CDMA/HSDPA, GSM/EDGE, CDMA2000 1x/1xEV-DO,  Bluetooth  , GPS, GLONASS, QZSS,
           PDC, PHS, Broadcast (ISDB-T/BS/CS/CATV), WLAN (IEEE802.11a/11b/11g)
  • Signal generation using waveform generation software (IQproducer)
           5G NR (TDD), 5G NR (FDD), LTE/LTE-Advanced, WLAN 11a/b/g/n/j/p and 11ac, W-CDMA/HSPA , CDMA2000 1xEV -DO
           TD-SCDMA, Fading, Multicarrier, DVB-T/H, TDMA

Expansion options

  • AWGN Transmitter [Opt-049/079]
           C/N: 40 dB
  • BER measurement function [Opt-021]
           Input bit rate: 100 bps to 40 Mbps
  • USB Power Sensor (sold separately)
           Supports connection of up to two USB power sensors.
           ♦ Frequency range: 50 MHz to 6 GHz [MA24106A], 10 MHz to 18 GHz [MA24118A], 10 MHz to 26 GHz [MA24126A], etc.
  • MIMO signal source: Supports local input [Opt-017]
           Baseband clock, local signal and trigger signal can be shared between up to four MG3710E devices to output phase coherent signals
           synchronized with the signal output timing to configure an 8x8 MIMO system.
  • Additional analog modulation input for 1stRF/2ndRF [Opt-050/080]
           Opt-050/080 expands to two internal modulation sources (AM/FM/ΦM) and one external modulation source
           supporting suppress two signals simultaneously.

Communication interface

  • Standard 1000BASE-T, GPIB and USB interfaces
  • Remote command: Integrated SCPI, compatible modes MG3700A/MS269xA/MS2830A. Common with MG3710A.
  • The Vector signal generator supports frequencies from 100 kHz to 2.7/4/6 GHz
  • ACLR: -68 dBc (W-CDMA, Test Pattern 1, 64DPCH, ≤+5 dBm)
  • Output level +23 dBm (CW, 400 MHz to 3 GHz)
  • Conversion time: <600 µs (List/Scan mode)
  • Integrated wideband (160 MHz/120 MHz) baseband signal generator
  • Dual RF (Optional) provides two independent RF outputs
  • Dual waveform memory (Optional) allows two signals to be independently modulated on each RF output
  • Generate and output modulated signals of various communication systems such as 5G NR (sub-6 GHz) TDD/FDD, TDD/FDD LTE-Advanced (Optional)

See more technical documents  here

See more technical products  here

Link FaceBook  Jon&Jul VietNam



Phone number: 0348097237
Address: No. 4, Street 14, Highway 13, Van Phuc Urban Area, Hiep Binh Phuoc Ward, Thu Duc City, Ho Chi Minh City, Vietnam