MP1900A Signal Quality Analyzer-R Máy phân tích chất lượng tín hiệu Anritsu VietNam
Price: Contact
Brand: Anritsu
Category: Testing and Measuring Equipment
Supplier: jonjul
Origin: Japan
Ứng dụng sản phẩm: accessory, Automation equipment, Electronic, Industry, Mechanical
0348097237MP1900A Signal Quality Analyzer-R Anritsu VietNam signal quality analyzer
Introducing MP1900A Signal Quality Analyzer-R Signal quality analyzer Anritsu VietNam
The MP1900A series is a high-performance, 8-slot modular BERT that supports all-in-one Physical layer measurements of both high-speed network interfaces such as NRZ and PAM4 as well as PCI Express/USB bus interfaces
To cope with the increasing data traffic due to the widespread popularity of smartphones and mobile terminals, data center network interfaces are being migrated to 200 GbE/400 GbE standards /800 GbE is faster, while media device connections are adopting PCI Express Gen6 supporting faster speeds of 64 GT/s; Omnichannel technology is also being deployed.
Anritsu's MP1900A Signal Quality Analyzer-R series is a high-performance BERT with 8 slots for modules, such as PPG, ED and Jitter/Noise Generator, to expand the measurement applications supported Analyzing the signal integrity of devices is getting faster and faster. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A also supports PCI Express bus, etc., interface measurement.
Target applications
100 GbE/200 GbE/400 GbE/800 GbE, CEI-25G/28G/56G/112G, InfiniBand EDR/HDR, Fiber Channel, PCI Express Gen1/2/3/4/5/6, Thunderbolt 1/2 /3, USB3.2/4 Type C, SAS-3/-4, DP1.4, Optical Module, SERDES, AOC, High Speed Connection
- Maximum 512 Gbit/s. transmission capacity
- PAM4 PPG/ED (MU196020A/MU196040A)
Baud rate from 2.4 to 64.2 Gbaud *1
4ch multi-channel scalability NEW PAM4/NRZ
High-speed Tr/Tf 8.5 ps (20 to 80%)
Low Intrinsic Jitter Output of 170 fs rms Random Jitter (typ.)
Low Noise and Low Distortion High Quality Data Output
4Tap Emphasis (20 dB Range)
ISI Tuning Function NEW FEC Patterning Margin BER stress < E-12 *2 PAM4 pattern editor and built-in clock and measurement symbol error recovery
- Maximum 512 Gbit/s. transmission capacity, one main frame expandable to 16ch (fills 8 slots with 32 Gbit/s 2 ch PPG)
- All-in-one support for both high-speed Ethernet and PCI Express interface testing
- New Broadband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A)
- Bit rates range from 2.4 Gbit/s to 32.1 Gbit/s
- Support NRZ/PAM4
- 10Tap Emphasis
- ISI function changes
- Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidth)
- Low Intrinsic Jitter Output of Random Jitter 115 fs rms (typical)
- 15 mV type high sensitivity data input. (EYE height)
- 1ch/2ch selection
- PCI Express link training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
- USB Express Link training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
- Jitter Tolerance, Jitter Tolerance measurement function (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
- Voltage noise additional function (Common/Differential/White Noise, use MU195020A/MU195050A)
Typical technical specifications
- Signal quality analyzer-R MP1900A
| Item | Indication |
|---|---|
| LCD | 12,1 inch, WXGA 1280 x 800 |
| Remote interface | GPIB, LAN |
| Module slot | 8 |
| External peripheral I/F | USB x6, VGA x1, HDMI x1 |
| operating system | Windows 7 embedded standard |
| Power | 100V(ac) to 120V(ac)/200V(ac) to 240 V(ac) 50 Hz to 60 Hz |
| Energy consumption | 1350 VA max. |
| Size/Volume | Maximum 340 (W) x 222.5 (H) x 451 (D) mm/20 kg. (modules not included) |
- Noise generator MU195050A
| Item | Indication |
|---|---|
| Channel number | 2 |
| Loss of insertion | -3dB |
| CMI | 0.1 GHz to 1 GHz/1 GHz to 6 GHz |
| DMI | 2 GHz to 10 GHz |
| White noise | 10 MHz to 10 GHz |
| Peak factor | >5 |
- PAM4 PPG MU196020A
| Item | Indication |
|---|---|
| Operating ratio (PAM4/NRZ) | 2.4 Gbaud to 32.1/58.2/64.2 Gbaud (optional selection) |
| Channel number | 1 |
| Output amplitude | 70 mVp- to 800 mVp-p (Single-ended) 140 mVp- to 1600 mVp-p (Differential) |
| Compensate | -2V to +3.3V |
| Emphasize | 4 Press, -20 to +20 dB |
| Channel Simulator | Create waveforms with insertion loss and simulate waveforms with corrected insertion loss Set by loading S-Parameter file (S2 P, S4 P) |
| CHAPTER | ISI generation waveform simulation Setting uses attenuation (–8.00 to 8.00 dB) at CEI-specified Nyquist frequency Used in conjunction with a channel board, such as the J1800A/J1758A (components optional accessory) or Noise Module MU195050A |
| PAM4 3 eyes can be changed independently | 20 to 50% (PAM4 amplitude level 0/3 = 100%) |
| Model PAM4 | SSPRQ, PRBS13Q, PRBS31Q, RS-FEC, vv |
| Added PAM4 sample error | MSB error, LSB error, LSB&MSB error, RS-FEC symbol error |
| Tr/Tf (20 to 80%) | 8.5 ps (typical, NRZ) |
| Random jitter | 170 fs rms (typical, NRZ) |
| I/O connector | V (f) |
- NEW PAM4 ED MU196040B
| Item | Indication |
|---|---|
| Operating Rate (PAM/NRZ) | 2.4 to 32.1 Gbaud or 58.2 (PAM4)/64.2 (NRZ) Gbaud (optional selection) |
| Channel number | 1 |
| Input amplitude | NRZ: −2.1G: 0.05 to 1.0 Vp-p; >32.1G: 0.1 to 1.0 Vp-p PAM4: ≤32.1G: 0.3 to 1.0 Vp-p; >32.1G: 0.4 to 1.0 Vp-p |
| Input Sensitivity (Eye Height) | NRZ: 19 mV @ 26.5625 Gbaud; 21 mV @ 53.125 Gbaud PAM4: 23 mV @ 26.5625 Gbaud; 36 mV @ 53.125 Gbaud |
| Clock recovery (Optional) | 2.4 to 32.1 Gbaud; 51 to 58.2 Gbaud |
| Equalizer (Optional) | Low frequency equalizer (1 GHz, 2 dB type) + DFE (1.4 dB type) |
| Model PAM4 | SSPRQ, PRBS13Q, PRBS31Q, vv |
| PAM4 counter | MSB, LSB, Symbols 0 to 3 (Optional) |
| Input connector | V (f) |
- 21G/32G bit/s SI PPG MU195020A
| Item | Indication |
|---|---|
| Operating bit rate (NRZ) | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
| Channel number | 1 or 2 |
| Output amplitude | 0.1 Vp-p to 1.3 Vp-p (Single-ended) 0.2 Vp-p to 2.6 Vp-p (Differential) |
| Emphasize | 10Press |
| Channel Simulator | Normal： Simulate Insertion Loss using S-parameter Inverse: Perform De-Emphasis compensation for S-parameter Insertion Loss S-Parameter File: S2P,S4P |
| CHAPTER | Output simulation for ISI using CEI-28G/25G Nyquist loss setting Supports loss control in combination with J1758A ISI board accessories Insert Loss settings: 1.5 to 25 dB, 0.01 dB steps , Nyquist frequency 0 to 25 dB, 0.01 dB steps, 1/2 Nyquist frequency
|
| Tr/Tf (20% – 80%) | 12 ps (typical) |
| Random jitter | 115 fs rms (typical) |
| PCIe and USB link training | Supported（MX183000A-PL021/PL022/PL025） |
| Output connector | K (f) |
- 21G/32G bit/s SI ED MU195040A
| Item | Indication |
|---|---|
| Operating bit rate (NRZ) | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
| Channel number | 1 or 2 |
| Input amplitude | 0.05 Vp-p to 1.0 Vp-p (Single-ended) 0.1 Vp-p to 2.0 Vp-p (Differential) |
| Input Sensitivity (Eye Height) | 15 mV (Eye height 28.1 Gbit/s) 30 mV/Eye（28.1 Gbaud, PRBS15, PAM4） |
| CTLE | Peak frequency 14, 8, 4 GHz Gain 0 to –12 dB |
| Clock recovery | Yes, supports SSC |
| PCIe and USB link training | Supported（MX183000A-PL021/PL022/PL025） |
| Output connector | K (f) |
Modules for the MP1800A series can be used in the MP1900A. Refer to the selection guide for more details.
See more technical documents here
See more technical products here
Link FaceBook Jon&Jul VietNam
-------------
Communications
Phone number: 0348097237
Email: Tu@jon-jul.com
Address: No. 4, Street 14, Highway 13, Van Phuc Urban Area, Hiep Binh Phuoc Ward, Thu Duc City, Ho Chi Minh City, Vietnam
